Â鶹¹ÙÍø

Â鶹¹ÙÍø
Office of the CIO  ›  Computing Services  ›  Services  ›  End-Point Computing  ›  Network Access  ›  Campus Wireless Network  ›  How to Connect to Wireless  ›  Windows Manual Connection Steps

Windows Manual Connection Steps

Follow the steps below to manually connect to the Â鶹¹ÙÍø-SECURE network.

Follow the steps for your OS to remove/forget the existing Â鶹¹ÙÍø-SECURE Wi-Fi profile.

Windows 11

  1. Right-click the Wi-Fi icon.
  2. Select Network and Internet settings.
  3. Select Wi-Fi > Manage known networks.
  4. Click Forget next to Â鶹¹ÙÍø-SECURE.

Windows 10

  1. Select Network Settings (Wi-Fi menu).
  2. Select Manage Wi-Fi Settings.
  3. Scroll to Manage known networks.
  4. Select Â鶹¹ÙÍø-SECURE and select Forget.

Windows 8

  1. Click the Wi-Fi signal.
  2. Right-click Â鶹¹ÙÍø-SECURE and select Forget this network.

Windows 7

  1. Right-click the Wi-Fi signal and select Open Network and Sharing Center.
  2. Select Manage wireless networks. 
  3. Right-click Â鶹¹ÙÍø-SECURE and select Remove network.

Windows 11

  1. Right-click the Wi-Fi icon.
  2. Select Network and Internet settings.
  3. Select Wi-Fi > Manage known networks.
  4. Click Add Network. 
  5. Enter the following:
    • Network Name: Â鶹¹ÙÍø-SECURE
    • Security Type: WPA2-Enterprise
    • EAP Method: Protected EAP (PEAP)
    • Authentication Method: Secured Password (EAP-MSCHAP v2)
    • Your private identifier: anonymous
    • Check Connect Automatically.
  6. Click Save.
  7. If prompted, click Connect.

Windows 7, 8, 10

  1. Right-click the Wi-Fi signal and select Open Network and Sharing Center.
  2. Select Set up a new connection or network.
  3. Select Manually connect to a wireless network and click Next.
  4. Enter the following:
    • Network Name: Â鶹¹ÙÍø-SECURE
    • Security Type: WPA2-ENTERPRISE
    • Encryption Type: AES
  5. Click Next.
  6. Select Change connection settings.
  7. Click Security.
  8. Verify Authentication Method is PEAP.
  9. Click Settings and enter the following:
    • Verify the server's identity by validating the certificate: checked
    • USERTrust RSA Certification Authority or InCommonRSAServerCA: checked
    • Authentication Method: EAP-MSCHAP v2
  10. Click Configure and uncheck Automatically use my Windows logon. Click OK.
  11. Click OK.
  12. Click Advanced Settings.
  13. Check Specify authentication mode and select User Authentication.
  14. Do the following:
    • Windows 10 - Click Save credentials and enter your Andrew userID and password. Click OK and Close to exit.
    • Windows 7 & 8 - Click OK and Close to exit. Select Â鶹¹ÙÍø-SECURE from the Wi-Fi list and click Connect. Enter your Andrew userID and password when prompted.